Tag: "solar"

08/17/18

  03:15:00 am, by Jim Jenal - Founder & CEO   , 1210 words  
Categories: All About Solar Power, Residential Solar, Energy Storage

What I Saw at Enphase - Mind Blown!

Enphase hqLast month during Intersolar, I (along with colleagues Sara and Victoria) was lucky enough to get invited to see a microgrid demonstration featuring the Enphase next-gen IQ8 at their headquarters in Petaluma, California.  As I had to sign an NDA as the price of admission, I was unable to write about what I had seen until today, when Enphase hosted their annual Analyst’s Day.  But I am no longer bound by that agreement, and can now tell you about what I saw. 

To say that I was impressed would be a gross understatement - quite simply, it was the most astonishing thing I have ever seen in the solar industry.  Settle in and let me tell you what I saw…

What Happens Today

Before I launch into describing the demo, let me remind you of what happens today.  All of the systems that we have installed are what is referred to as “grid-tied” which means that if the grid goes down, the PV system that is capable of back-feeding the grid also goes down, and remains down until the grid comes back.  (This is to prevent your house from being an island of energy, feeding the grid, and potentially injuring a worker trying to restore grid service.  As a result, this feature is known as “anti-islanding” and it is required of all inverter systems that are connected to the grid.)

Normally this is not a problem, but last month, when it got super hot out here (think 115° F hot!), both SCE and LADWP suffered dozens of outages, taking down PV systems across large swathes of LA County, and leaving frustrated PV owners without power, or A/C, just like their PV-less brethren.  Not good.

What I Saw in the Lab

Which brings us to what I saw at Enphase last month.

The lab looked like an ordinary industrial space, but with a series of household appliances and tools at one side.  There was a simulated array feeding a bank of IQ8 inverters, and a display that showed the output of the array (i.e., PV production), the total consumption from the loads, and any power being exported or imported to support those loads.  At the start of the demo the only load was a single red lamp, and the display indicated that it was drawing roughly 90 Watts.  The PV array was producing roughly 1.9 kWs, so the excess 1,800 Watts was being exported to the grid.  All super normal stuff.

But then things got interesting…

One of the engineers switched off the breaker that connected the PV array to the grid… and nothing happened!  Well, actually, a lot happened, but what didn’t happen was that the red light did not go off.  It didn’t even flicker to the extent that we could detect it.  But then when you looked at the display you noticed something amazing.  Not only had the microinverters created a grid on their own in fractions of a second, but they had throttled the output down so that now the production of the PV array exactly matched the load of the red light!  And here’s the kicker - there were no batteries attached to this system!!!

But what fun is just having a light on?  How about some toast?  So they switched on a toaster, and it lit up, and the total load jumped by about 1,000 Watts, making the total load now around 1.1 kW, and the PV array scaled up to meet it!  Still no batteries.  And how about this - there was no central controller, no master-slave relationship between the microinverters.  Rather, this was the “hive mind” at work, as the micros sensed the demand and scaled up or down as necessary to meet that load!

But wait, there’s more!

The next load to be added was a grinder like you might find on your workbench in the garage.  All by itself, that device drew roughly 1,200 Watts, bring our total load to roughly 2.3 kW - more than the maximum output of our simulated array.  What would happen when that was added to the mix?  Surprisingly little.  The grinder spun normally, but the red light dimmed slightly.  What was going on?  The system’s “hive mind” had lowered the voltage slightly (a microgrid equivalent of a brown out) to meet the amperage demand of the new load mix!  So slightly slower than normal, cooler than normal, dimmer than normal, but all operating.

Of course, all good things must come to an end.  Our already overloaded microgrid faced one more challenge - a vacuum cleaner with a significant in-rush current, far in excess of what the grid could sustain.  Indeed, as soon as they switched the vacuum cleaner to “on", everything shut off.  Nothing was damaged, the microinverters just shut off to protect themselves.

Turning on the vacuum cleaner served as the “ah-ha” moment for the potential homeowner - I guess I can’t run everything in grid outage mode.  So what do you do when something you just did produced an undesired result?  Well if you can, you undo it!  Turning the vacuum cleaner off, immediately restored the microgrid to its previous state of operation!  No delay.  No human intervention - just turn off that latest (over)load, and the system recovers on its own!

How cool is that?  Pretty damn cool, if you ask me!

Batteries Please?

So what about batteries, how do they play with this new system?  Just exactly as you would want.

The engineers added a bank of batteries to the mix, each with an IQ8 installed.  Now the display also indicated the battery’s overall state of charge, and whether they were charging or discharging.  Reset the demo to just the red light as a load and the batteries at 30% state of charge.  The PV array output jumped back to its maximum, with the surplus energy being used to charge the batteries.  As more loads were added, the PV array remained at maximum output, and as needed, drew power from the batteries.  Should the batteries reach full capacity and the PV output is greater than the loads, the microinverters will once again throttle down.

Sweet!

What’s Next?

I hope you agree that this was an amazing demo, and the IQ8 (or Ensemble, as Enphase refers to the overall system) has tremendous potential, both for Enphase as a company, and for so many nascent markets.  Think of how this product could have helped out in Puerto Rico, or in parts of Africa which have never, ever seen a grid!  Makes me want to book a trip to bring power to a village somewhere - hey Laurel, what do you say?

For our own clients, this has the potential to be the answer we have been seeking ever since Elon’s whoppers got people thinking about storage for the first time ever.

A point we raised with Enphase management is the need to have a reasonable upgrade path for existing clients.  Indeed, I have a call with Enphase tomorrow to discuss that very topic.  We know that current Enphase IQ products (the 6+ and 7+ we have been installing this year) will be compatible with Ensemble.  We expect to be able to work with older systems, though there may be a higher retrofit cost.  When we have that information, we will surely let you know!  The IQ8 is expected to be available in 1H2019… watch this space!

 Permalink28 comments »

08/25/16

  05:48:00 pm, by Laurel Hamilton   , 657 words  
Categories: All About Solar Power, Ranting

Velvet Dallesandro - Electrician and Solar Jedi Master

I love conducting solar site assessments and having that first conversation with a potential client. Often we spend far more time discussing all the ins and outs of going solar with the property owner than is necessary for the solar assessment measurements. One of the questions we always spend some time on is: “How exactly is Run on Sun different than other solar companies?” Here in sunny Southern California this is an important question as there are so many people offering PV solar services. Of course I describe how the products we use are selected for their high quality, warranties, and trust in the manufacturers. I also explain how as a small company with a mission focus, we take a very honest and ethical approach to helping people green their energy. But one of the major ways we stand above all the rest is also a feature that is hard to convey in that first conversation. Hence, the theme of this blog post…

My best answer to the above question, “We have Velvet Dallesandro as our Chief Electrician.”

The work that Velvet does connecting the power of the sun to your electric meter is akin to an art form. But alas, the art of a solar electrician is often hidden behind dead plates and easy to overlook if you’re not paying attention. So here are a few examples of Velvet’s work. She may not be in a Los Angeles art gallery but her work is providing people with beautiful, safe, and emission-free energy across the county! 

 

Service panel

Disconnect

If you’ve ever looked behind the dead plate on your electric bus (where all your breakers are) you likely were frightened by what you saw. A mess of cables, cobwebs, and sometimes outright dangerous circumstances - like the time I saw one missing its main breaker entirely. However, if Velvet is re-wiring your service panel it may look more like something you could put on your wall with rainbows of color coded wires and perfect 90 degree bends. (Service panel shown at left by Velvet, solar AC disconnect work at right by Ralph Carillo.)

Chandler Conduit 

Wiring is far from Velvet’s only art form. How do installers bring solar power from the roof to the electrical service? While the most visually appealing is to hide the magic completely by going thru an attic space and inside walls but sometimes that just isn’t possible. 

conduit

Velvet doesn’t just throw flex conduit around willy nilly to get the job done quick like some installers. It takes a lot of creativity to make the wiring run as attractive as possible. First and foremost, she always uses galvanized conduit for outside wiring as opposed to flex - it lasts for the long run and it is much more difficult to punch a fire axe through than flex, making it much safer. Second, Velvet avoids piecing together conduit as much as possible. Her goal is to make whatever crazy runs are necessary as seamless as possible - think avoiding possible leaky weak spots at seams. This means she has become a jedi master at bending conduit. Eight bends in one stick of conduit paralleling windows, gutters, or that pretty bush you don’t want to disturb? Not out of the question when Velvet is on the job (or her prodigy apprentice Ralph for that matter). 

 

Beyond the art she’s also an all around rock star. Check out this classic; pulling wire for a 45kW job at Chandler School…(That’s her on the right pulling wire through at least 30 feet of conduit on a 100+ degree summer day.)

Pulling her weight

She more than pulls her weight! So if you’re looking into going solar take note, there is an art that goes into the details. And the details really do count! Velvet’s wiring is the safest you will find and truly built to last. A rarity in an industry where most companies are trying to race through projects at lightning speed. Bottom line…we are so thankful to have Velvet on our team!

Velvet

07/30/16

  08:33:00 am, by Laurel Hamilton   , 428 words  
Categories: All About Solar Power

2016 Top 500 Solar Contractors: Still on Top!

Solar Power World Top 500 ContractorsIt’s the time of year again when we hold our breath and hope to be included in the Solar Power World Top 500 Solar Contractors list. As more and more companies come into the solar sector it becomes more and more of a real honor to be included in this prestigious list of the best in the industry.

Run on Sun made the cut!

We’d like to thank our friends at Solar Power World for the valuable work they do delivering well-rounded information on the solar industry to the wider public. They also provide a very important service helping our solar community to share information, best practices, and continue to thrive and grow. This is our fourth year running on the list which has been published for the last five years.

Beyond the Top 500 list, Solar Power World also gathered some data about the industry as a whole through their annual survey. Some interesting facts from the results include:

  • Solar continues to provide valuable jobs: Top Solar Contractors employed 133,707 people in 2015, up from 124,967 in 2014.
  • Residential markets provide most solar jobs: 287 contractors worked primarily in the residential market; 154 worked primarily in the commercial market
  • California continues to lead: 130 companies were headquartered in California
  • Many companies are investing in rigorous solar education: 355 companies had at least one NABCEP-certified principal on staff. (Run on Sun is proud to have all principals NABCEP certified)
  • Most solar companies are local businesses: 77% of companies reported doing most of their business within its state of headquarters
  • Many solar companies are small businesses! 119 contractors reported have 10 or fewer employees; 236 reported having between 11 and 50

While the majority of solar electricity is produced at large utility-scale solar power plants, the majority of jobs are actually located with local small to medium sized companies that service residential and commercial clients. 

“No one can deny that local companies are supporting the growth of the industry. Our Top Solar Contractors are the face of the industry—meeting homeowners and business leaders on doorsteps every day.” - Kathie Zipp, Managing Editor Solar Power World

When you support solar, you not only benefit the environment but with many solar contractors you are also supporting small local businesses that provide jobs and put money back into our local economies. It’s nice to know Run on Sun is in good company and that we have great people like the team at Solar Power World backing our efforts to build a clean-energy future for all. Congratulations to all the top 500 solar contractors of 2016! 

Run on Sun having fun at SPW's Intersolar Booth

Run on Sun’s Laurel Hamilton and Josh Sanchez enjoy the Solar Power World booth at Intersolar 2015

06/09/16

Video Release: Making the world better...one roof at a time

Its not every day that we get to unveil a beautifully crafted video showcasing just what it is that makes Run on Sun tick. Happily today is different! Our fabulous distributor, Baywa r.e., has partnered with us to create our very own professional marketing video:

Baywa r.e. has been more than just a products distributor for Run on Sun. We began our partnership with Baywa, formerly Focused Energy, back in 2009 when we found them to be a much more detail oriented operation than their competitors. They proved to us they could translate what happens on the roof to ensuring we got all the pieces necessary to make installations run smoothly. Now, our primary reason for continuing to partner with Baywa r.e. has evolved. Their management and staff all share our vision for a solar industry that is better. One that operates with the highest degree of ethics and transparency and a mission to help consumers save money while reducing our impact on the environment. They have supported us, and other small installers, in many ways far beyond the normal functions of a distributor. Case in point is this video which they produced to help us share our message with our community.

I’d also like to point out a few details on the installations featured in this video: 

LAWC Reservoir

Lincoln Avenue Water Company Reservoir Project: 

This was our second project with Lincoln Avenue after helping their administrative office go solar in 2011. The 2015 Reservoir project was in partnership with Baja Construction building the ground mount structure to support the 246 LG280 watt panels and Enphase M250 microinverters. Run on Sun installed the solar system to utilize otherwise unused land below the reservoir offsetting nearly 50% of the energy required to run their pumphouse.  

Westridge School for Girls:

Westridge School for Girls

While we didn’t end up shooting video at Westridge we really wanted to be sure to include this project as it is near and dear to our hearts. As Run on Sun’s first school installation and Jim Jenal’s (Founder and CEO) daughter’s alma mater we really enjoyed helping them go solar. In 2012 we installed a solar array on their Performing Arts Center consisting of 216 LG250 watt solar panels which were the cream of the crop back then! Working with Westridge School for Girls was a wonderful experience which included our very own Jim Jenal leading a science class tracking a solar eclipse using the Enphase microinverter data! We believe solar at schools offer such great added benefits providing a resource for students to learn about renewable energy as well as math, engineering, environmental issues and more! 

Chandler School Solar Installation

Chandler School:

In the Fall of 2015 we completed the installation of 147 LG300 watt solar panels on the gym at Chandler School. Chandler was also a fantastic partner to work with partially because we share their values in environmental stewardship. We hope that growing up in an educational environment where solar power is the norm will help students navigate a future where sustainable clean solutions will be the only way forward. We would also like to give a huge shout out to the amazing Trevor Spicer, Director of Operations and Information Technology, for the off-the-cuff cameo and kind words in the video. 

Residential 14kW Project:

Residential Installation

This was the most recent Run on Sun installation featured in the video, where a lot of the dialogue with Jim Jenal takes place. This is the second home these particular clients have installed solar with Run on Sun as they recently moved into this beautiful Altadena mid-century modern home. Their roof was a perfect slate for a solar array, and we wouldn’t be surprised if this particular feature was one reason they chose the property! Owning electric vehicles and wanting to offset as much of their electricity as possible we maxed out the space with 44 LG320’s, top of the line panels today! It didn’t hurt that the view from the roof was one to die for, spanning much of the valley with Los Angeles skyscrapers in the distance. Of course, as evidenced by one of the shots in the video, we could also see the smog levels each day we worked at this site further enhancing our resolve to continue to get more solar out there!

Thanks for reading as we share some of the projects we are most proud of. And of course, let us know if you’d like to get a free quote today and share in our commitment towards the belief that the world can be better one roof at a time!

Search

Jim Jenal is the Founder & CEO of Run on Sun, Pasadena's premier installer and integrator of top-of-the-line solar power installations.
Run on Sun also offers solar consulting services, working with consumers, utilities, and municipalities to help them make solar power affordable and reliable.

Ready to Save?

Let’s Get Started!

We're Social!



Follow Run on Sun on Twitter Like Run on Sun on Facebook
Run on Sun helps fight Climate Change
Free CMS